1.) You should setup your Inflatable Pool on level ground which is 100% free of rocks, debris and vegetation so not to damage your Inflatable Pool. To install heating or lighting etc you should also think about electrical hookup too and this will help with easy maintenance.

2.) Now you have cleared an area for your Inflatable Pool you should lay out the Inflatable Pool in that chossen area and pull it into shape as much as possible (this is only layed out on the cleared floor). Make sure you have put plugs in your Inflatable Pools holes and the filter hoses.

3.) Now your Inflatable Pool is layed out flat on the floor in your chossen Inflatable Pool area you can start filling the top ring of your Inflatable Pool with air (make sure you fill the ring fully) once that has fully filled put approximately one inch of water in the bottom of your Inflatable Pool. All wrinkles shoul now be smoothed out buy hand as much as you can and make sure the bottom of the Inflatable Pool is completely flat.

4.) Now you have smoothed out your Inflatable Pool as much as you can the Inflatable Pool is ready to be filled with water. Filling your Inflatable Pool with water should take around 2hours (size of 8ft x 30").  Once your Inflatable Pool is fully filled simply connect the hoses for your pump and unplug the valves.

5.) Now you have done all that its time for the finnal step, I know we said only 4 steps but this is really easy. Just Jump in and enjoy!